# Fiber Cement Siding in Grand Rapids, MI | Lap & Panels

> Fiber cement siding in Grand Rapids, MI: lap boards and panels with a painted-wood look, and broken boards repaired. Free estimates.

URL: https://grandrapidssidingcontractors.com/fiber-cement-siding/

# Fiber Cement Siding in Grand Rapids for the Look of Painted Wood

Fiber cement lap siding and panels on your whole house, finished at the factory or painted once they're up, and repairs to fiber cement siding that's already up.

- 20+ years on Grand Rapids siding
- Straight price ranges
- Free estimates
- Old siding off before new goes on
- Repairs that leave good siding in place
- 20+ years on Grand Rapids siding
- Straight price ranges
- Free estimates
- Old siding off before new goes on
- Repairs that leave good siding in place

## Fiber Cement Lap Siding on a Grand Rapids House

From the sidewalk, a house in fiber cement looks like it has painted wood lap siding, with the same crisp boards and the same shadow line under each one. Up close, you can tell it's a different material. Fiber cement is made from cement, sand and wood fibers pressed into boards and panels. It's heavier than vinyl, and it's made to resist rot. At [Grand Rapids Siding Contractors](https://grandrapidssidingcontractors.com/) we put fiber cement siding on whole houses, and we repair the boards on houses that already have it.

### Fiber cement may suit you if

- You'd like the house to look like it has painted wood boards
- You don't mind a paint job every so often, or you'd rather pick a factory finish

### Vinyl may suit you better if

- Keeping the cost down comes first
- You'd rather never paint the siding at all
- You like the profiles and colors vinyl comes in

## Keeping the Edges of Fiber Cement Siding Dry

Most of the care in a fiber cement job goes into the edges of the boards, because a cut end that stays wet is where trouble tends to start. Three places get the most attention:

- **Where a wall meets a roof**, the boards stop a little above the shingles so they aren't sitting in snowmelt.
- **At the bottom of each wall**, they're kept up off the soil, the mulch and any concrete.
- **Where two boards meet end to end**, a small piece of flashing goes behind the joint to turn water back out.

Snow piles against the bottoms of walls here and melts off roofs onto the siding below. Boards held up out of that water can dry out between storms, which is why those small gaps and pieces of flashing matter so much on a Grand Rapids house.

## Should Your Fiber Cement Siding Come Painted From the Factory?

Fiber cement comes two ways, and choosing between them is one of the first decisions on the job. Factory-finished boards arrive with their color already on. Primed boards go up with only a coat of primer and get painted on the house afterward.

### Factory-finished or primed

- **A factory finish means no painting at your house.** You choose from the colors the manufacturer offers, the cut ends get sealed as the boards go on, and the siding is finished when the last board is up. The boards do cost more to buy.
- **Primed boards let you pick any color you like.** That can matter on an older house, or when you'd like the siding to go with a color already on the porch or the garage. Painting becomes part of the job, and since most paint and caulk need warmer, dry weather to set properly, the season can decide when the last coat goes on.

Either way you end up with a painted siding, and we're glad to help you weigh the two against your house and the colors you have in mind.

## Fiber Cement on an Older Grand Rapids House

A lot of Grand Rapids' older neighborhoods were built as wood houses, and fiber cement is one of the ways to bring back the look of painted lap boards when new siding makes more sense than repairing the wood. If the house dates from before 1978, old painted wood that gets disturbed may call for lead-safe work, and that becomes part of taking it off.

**In Cherry Hill, Heritage Hill and the city's other historic districts,** the historic preservation commission only considers fiber cement case by case, where the wood can't practically be repaired or replaced with new wood. Our [wood and cedar siding](https://grandrapidssidingcontractors.com/wood-and-cedar-siding/) page goes through what the city looks for there.

## Fiber Cement Siding Cost in Grand Rapids

This is what fiber cement siding usually costs to put on a whole Grand Rapids-area house. The range covers a house with something like 1,250 to 2,000 square feet of wall, the old siding stripped off and carted away, and fresh trim at every corner, window and door.

-

Fiber cement siding, whole house: $15,000 to $30,000

### What can raise or lower your price

- **Factory finish or paint at the house.** Factory-finished boards cost more to buy. Primed boards cost less up front, and painting them becomes part of the job.

- **Height and reach.** Fiber cement is heavy, so second-story walls and tall gables take more time and more work to get each board up and fastened.

- **The trim.** Corner boards, window and door trim and the board under the eaves add materials and labor, and they shape how the finished house looks.

- **Every layer of old siding.** It all comes off before the first board goes on, and more layers take more time and more trips to haul away.

- **What turns up on the wall.** Sound sheathing adds nothing. Rot that shows up once the old siding is down is priced on its own.

## What Happens on a Fiber Cement Siding Job

-

### The estimate and your finish

At the house we size up the walls, the trim and the roof lines, talk through board styles and finishes with you, and the estimate comes to you in writing.

-

### Tear-off, wrap and flashing

The old siding comes off and the sheathing gets a close look. Anything soft is fixed once you've said yes to it, and then house wrap and flashing go on before the first board.

-

### Trim first, then the boards

The corner boards and window and door casings are set before any siding. After that the lap boards go on one course at a time, each row covering the nails in the row below it.

-

### Paint, caulk and cleanup

Primed boards get their paint, cut ends are sealed and the joints at the trim are caulked. Then the yard and driveway get cleaned up, and you get a last look at the house with us before we pack up.

## How Much Fiber Cement Siding Will Your House Take?

Work out the area of your walls and gables, less the windows and doors, to see roughly how much fiber cement it takes to cover the house, with a little added for cutting.

## Fiber Cement Siding Questions

### Is Hardie plank the same as fiber cement siding?

Yes. Hardie plank, or Hardie board, is what a lot of people call fiber cement siding, after one well-known brand of it. Fiber cement is the material itself, and more than one company makes it, in lap boards and panels. If you've seen a house you like and someone told you it was Hardie board, it's fiber cement, and we can talk about getting that same look on your house.

### Can you replace a few broken fiber cement boards?

Yes. A board cracked by a falling branch or a hard hit can be cut out by itself and replaced with a new one. Because fiber cement is a painted siding, the new board can be finished to match the wall around it.

### What is the most common problem with fiber cement siding?

One to watch for is water at the edges of the boards. Swollen or soft edges usually mean water has been sitting against them. The boards themselves can be replaced, and the more useful part is finding where the water has been getting to them, so the new boards stay dry.

### What are the downsides of fiber cement siding?

Two to know about are cost and paint. It costs more than vinyl to put on, and like any painted siding, it will want a fresh coat of paint down the road. The caulked joints along the trim are worth checking now and then and redoing when they crack.

## Fiber Cement Siding Guides

-

### [Vinyl, Fiber Cement or Wood Siding for a Michigan House](https://grandrapidssidingcontractors.com/guide/vinyl-vs-fiber-cement-vs-wood-siding/)

Fiber cement next to vinyl and wood, so you can see where it fits on looks, upkeep and budget.

-

### [What Does Siding Replacement Cost in Grand Rapids?](https://grandrapidssidingcontractors.com/guide/siding-replacement-cost-michigan/)

Whole-house prices in fiber cement and the other materials, and what adds to the total on a bigger or taller house.

-

### [Siding Repair or Replacement: Which Does Your House Need?](https://grandrapidssidingcontractors.com/guide/siding-repair-vs-replacement/)

If your siding has trouble in a few places, how to tell whether repairs will carry it or new siding is the better value.

## Other Siding Services

### [Siding Replacement](https://grandrapidssidingcontractors.com/siding-replacement/)

Every wall of the house re-sided after a full tear-off, in the material you choose.

### [Vinyl Siding](https://grandrapidssidingcontractors.com/vinyl-siding/)

The lower-cost choice, with its color made in at the factory and a choice of lap, Dutch lap, board and batten or shake.

### [Wood and Cedar Siding](https://grandrapidssidingcontractors.com/wood-and-cedar-siding/)

Real wood boards and shingles, repaired one at a time or put on new and stained or painted.

### [Siding Repair](https://grandrapidssidingcontractors.com/siding-repair/)

For a few damaged boards or panels on any kind of siding, with the rest of the wall left as it is.

## Is Fiber Cement Siding Right for Your House?

Let us know the look you'd like for your house, and we'll come out, measure the walls and tell you what fiber cement would cost on it, factory-finished or painted once it's up.
